Tripping Circuit Breakers
Repeatedly tripping breakers may indicate an overloaded circuit, short circuit, damaged wiring or faulty electrical equipment.
Power keeps tripping, half the sockets are dead, or a light flickers every time the kettle goes on? We track down electrical faults for homes, landlords and businesses across High Wycombe, Beaconsfield and the surrounding area, and fix the cause rather than the symptom.
From tripping circuit breakers and RCD faults to power loss, faulty sockets and lighting problems, our qualified electricians investigate the cause and recommend the appropriate repair.
Electrical faults can be disruptive and, in some cases, unsafe. Repeatedly tripping circuit breakers, loss of power, faulty sockets, flickering lights or unusual electrical behaviour should be investigated by a qualified electrician.
Wycombe Electrical Ltd carries out structured electrical testing to identify the source of the problem. Once the fault has been located, we explain the findings clearly and advise on the repair or remedial work required.
The objective isn't simply to reset the circuit, but to understand why the fault occurred and reduce the likelihood of the problem returning.
Found a sticky green residue on plug pins, or green ooze coming from a socket, switch or light fitting?
Find out what green goo in your wiring means →

Electrical faults can appear in different ways, from repeated circuit breaker trips to complete or partial power loss. Wycombe Electrical Ltd investigates faults across domestic, rental and commercial properties to identify the cause and recommend the correct remedial work.
Repeatedly tripping breakers may indicate an overloaded circuit, short circuit, damaged wiring or faulty electrical equipment.
An RCD may trip because of leakage current, water ingress, damaged wiring, insulation failure or a faulty appliance.
Loss of power to one room, one circuit or the entire property may require testing of the consumer unit, circuits and connected equipment.
Loose, damaged, overheated or intermittent sockets and switches should be inspected and repaired by a qualified electrician.
Flickering lights, repeated lamp failures or lighting circuits that stop working may be caused by loose connections or damaged wiring.
Heat, discolouration or burning smells around electrical accessories can indicate a serious fault and should be investigated promptly.
Wycombe Electrical Ltd uses a structured testing process to identify electrical faults accurately and safely. The aim is to locate the cause of the problem, explain the findings clearly and recommend the appropriate repair or remedial work.
We review the symptoms, when the issue started and which circuits, rooms or appliances appear to be affected.
The consumer unit, circuits, sockets, switches, lighting and connected equipment are inspected and tested where appropriate.
Test results are used to determine whether the issue relates to wiring, accessories, appliances, overloading or leakage current.
The findings are explained clearly, followed by advice on the repair or remedial work required.
A few things you can count on, from a single socket to a full rewire.
We're an NICEIC Approved Contractor, so our work is assessed against BS 7671 and every job is certified.
Houses, flats and rented homes, plus offices, shops and industrial units.
Based in Stokenchurch and serving High Wycombe, Beaconsfield, Amersham, Marlow, Chesham and nearby areas.
EICRs for landlords, homeowners and businesses, with a clear report on what needs doing and what doesn't.
Fault finding, rewiring, lighting, network cabling, outbuilding power and commercial electrical work.
We'll tell you what actually needs doing and what can wait, and the quote is free.
Answers to common questions about tripping circuits, RCD faults and power loss.
A breaker trips to protect the circuit, so when it does, it's doing its job. The usual causes are too many things running on one circuit, a short circuit, damaged wiring, a worn socket or switch, or a faulty appliance. If it trips once and stays on after a reset, keep an eye on it. If it keeps tripping, please don't keep resetting it. That's a sign something needs testing properly, and we can track down the cause for you.
We start by asking what's been happening: what trips, when it happens and what was in use at the time. Then we inspect the installation and test the affected circuits and accessories to narrow down the cause, rather than guessing. Once we've found it, we explain it in plain English and tell you what's needed to put it right before any repair work goes ahead.
Contact Wycombe Electrical Ltd if you are experiencing tripping circuits, power loss, faulty sockets, lighting problems or another unexplained electrical issue.
Our qualified electricians provide fault diagnosis for homes, landlords and businesses across High Wycombe, Beaconsfield and surrounding areas.